This photo may not be a photo of actual part
Midget Right Rear Torsion Arm XXX/STEALT
$66.29
Midget right rear torsion arm. Aluminum. Complete with bolt. Notched for Shock Clearance.
Triple X's Torsion Arm design is state of the art in that it saves weight and increases durability without sacrificing function. Correct pocketing and material specs (we use 2024 for all torsion arms and stops for optimal tensile strength and yield) make these arms hold up over the long haul, no matter how rough and tumble your track is. 2024 material also lets you remove the arms from the torsion rack without worrying about stripping the splines. Use with 1/2" x 1/2" 4130 Rod Ends
Arm: Right Rear
Length: 11" (from center of torsion bar hole to end).
Setback: 33.0"
Offset: 2 3/8" (bend from inner edge to rod end center line)
Weight: 1.5 lbs
Material: Aluminum
Finish: Polished
Triple X's Torsion Arm design is state of the art in that it saves weight and increases durability without sacrificing function. Correct pocketing and material specs (we use 2024 for all torsion arms and stops for optimal tensile strength and yield) make these arms hold up over the long haul, no matter how rough and tumble your track is. 2024 material also lets you remove the arms from the torsion rack without worrying about stripping the splines. Use with 1/2" x 1/2" 4130 Rod Ends
Arm: Right Rear
Length: 11" (from center of torsion bar hole to end).
Setback: 33.0"
Offset: 2 3/8" (bend from inner edge to rod end center line)
Weight: 1.5 lbs
Material: Aluminum
Finish: Polished
