1.75" Id 45° 4" Legs Silicone Elbow

Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand-crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from -50° C to +180° C (-58° F to 356° F).

This midnight Black 45 degree elbow has a 1 3/4" ID with a smooth, shiny "wipe-down" finish. The legs measure at least 4 inches long (measured from the centerline of the opposite leg). The 3-ply reinforcement results in a working pressure rating in excess of 35 psi and a 4.5mm wall thickness (54mm / 2 1/8" OD). Use our Hose Joiners (HJ45) and our Lined Hose Clamps (Part No. 506-705-1213) to construct the exact shapes you need.

Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.