Filter by Keyword
Filter by Category
» Oil System       Clear
» Oil Cooler

494-ALL30145 #1

This photo may not be a photo of actual part

Engine Oil Cooler With -12 An Fittings

Part# 494-ALL30145




Fluid Cooler, 8.750 X 15 X 3.500 In, Plate Type, 12 An Male Inlet / Outlet, 1/2 In NPT Female Port, Aluminum, Natural, Engine Oil, Each

$259.99




Adding an oil cooler to a vehicle
increases engine life and reduces
engine operating temperature. Engine oil not only lubri
-
cates but also removes a large amount of heat from the
engine. Top engine builders recommend and often require
use of an oil cooler. Coolers have a 1/2"NPT
female bung
commonly used for connecting a temperature sending
unit or similar accessories and have built in flanges for
mounting to the deck underside of most Dirt Late Models,
Modifieds or other vehicles that would benefit from use
of an oil cooler.
Adding an oil cooler to a vehicle increases engine life and reduces engine operating temperature. Engine oil not only lubri-cates but also removes a large amount of heat from the engine. Top engine builders recommend and often require use of an oil cooler. Coolers have a 1/2"NPT female bung commonly used for connecting a temperature sending unit or similar accessories and have built in flanges for mounting to the deck underside of most Dirt Late Models, Modifieds or other vehicles that would benefit from use of an oil cooler.



Categorized under:
  · Oil System » Oil Cooler